THỐNG KÊ

  • Khách đang online: 7
  • Truy cập hôm nay: 350
  • Lượt truy cập: 536760
  • Số trang xem: 598202
  • Tổng số danh mục: 25
  • Tổng số sản phẩm: 109

QUẢNG CÁO

Bạn đang ở: Trang chủ » Danh mục » BỘ CHIA TÍN HIỆU 4-20mA » chia tín hiệu giá rẻ|bo chia tin hieu weidmuller|bo chia tin hieu phoenix contact

Dùng cuộn chuột thay đổi chế động phóng to ảnh

Click để xem ảnh lớn !

chia tín hiệu giá rẻ|bo chia tin hieu weidmuller|bo chia tin hieu phoenix contact

Mã SP: Dn21000 Drago

Giá bán: liên hệ

Tình trạng: Còn hàng

Bảo hành: 12 THÁNG

Số lượng:

Chia sẻ sản phẩm trên mạng xã hội:


CTY CHÚNG TÔI CHUYÊN CUNG CẤP BỘ CHIA TÍN HIỆU 4...20mA CỦA HÃNG DRAGO, HÃNG PR

HÀNG CHẤT LƯỢNG SẢN XUẤT TẠI ĐỨC

ĐỘ SAI SỐ: 0,1%

HIỆU CHỈNH BẰNG DIP SWITCH

HÀNG CÓ SẴN TRONG KHO

THÔNG SỐ KỸ THUẬT

Technical Data

Input

Input signal
(calibrated switchable)
0 to 20 mA, 4 to 20 mA, 0 to 5 V, 0 to 10 V, 1 to 5 V, 2 to 10 V
Input resistance Current input
Voltage input
≤ 35 Ohm
≥ 100 kOhm
Overload Current input
Voltage input
< 50 mA
< 30 V
Transmitter supply Tx
(switchable)
16 V (open circuit voltage/short circuit current ≤ 22 V/35 mA)

Output I + II

Output signal
(calibrated switchable)
0 to 20 mA, 4 to 20 mA, 0 to 5 V, 0 to 10 V, 1 to 5 V, 2 to 10 V
Load Current output: ≤ 6 V (300 Ohm at 20 mA) Voltage output: ≤ 5 mA (2 kOhm at 10 V)
Linear transmission range -1 to +110 %
Ripple < 10 mVrms

General Data

Transmission error < 0.1 % full scale
Temperature coefficient 1) < 100 ppm/K
Cut-off frequency -3 dB 5 kHz
Response time T99 150 µs
Test voltage 3 kV AC, 50 Hz, 1 min, Input against Output I against Output II against power supply
Working voltage 2)
(Basic Insulation)
Up to 600 V AC/DC for overvoltage category II and pollution degree 2 acc. to EN 61010-1 between all circuits.
Protection against electrical shock Protective separation according to EN 61140 by reinforced insulation in accordance with EN 61010-1 up to 300 V AC/DC for overvoltage category II and pollution degree 2 between all circuits.
Ambient temperature Operation
Transport and storage
–25 °C to +70 °C   (-13 to +158 °F)
–40 °C to +85 °C   (-40 to +185 °F)
Power supply 24 V DC       16.8 V to 31.2 V DC, approx. 1.4 W
EMC 3) EN 61326-1
Construction 6.2 mm housing, protection class: IP 20, mounting on 35 mm DIN rail acc. to EN 60715
Weight Approx. 70 g
  1. Average TC based on the final value in specified operating temperature range
  2. As far as relevant the standards and rules mentioned above are considered by development and production of our devices. In addition relevant assembly rules are to be considered by installation of our devices in other equipments. For applications with high working voltages, take measures to prevent accidental contact and make sure that there is sufficient distance or insulation between adjacent situated devices.
  3. Minor deviations possible during interference

Block diagram

<p>Normsignal-Splitter DN 21000<br>Isolation Signal Splitter DN 21000</p>

Dimensions

Masszeichnung-mitBus
Connection
Captive plus-minus clamp screws
Wire cross-section max. 2.5 mm² / AWG 14
Stripped length 6 to 8 mm / 0.28 in
Screw terminal torque 0.8 Nm / 7 lbf in
Optional power connection via In-Rail-Bus (see accessories) Terminal assignments
1   Input    -I   +U   +Loop
2   Input    +I   -U   -Loop
     
3 + Output II
4 - Output II
     
5 + Output I
6 - Output I
     
7 + Power supply (connected to In-Rail-Bus)
8 - Power supply (connected to In-Rail-Bus)
Liên hệ để được tư vấn: Thanks and best regards Long Tran Mob.: +84 909 006 435 Email.: long.tran@aumyco.com   AU MY technology Service Trading Company limited   Add.: 93/36 Street 02, Tam Binh Ward, Thu Duc District, Ho Chi Minh city, Vietnam Tel.: +84 3 816 2902      Fax: +84 3 816 2902 Web.:    www.aumyco.com          Email.: info@aumyco.com           www.tbcongnghiep.com              www.chuyendoitinhieu.com      www.doluongcongnghiep.com
CTY CHÚNG TÔI CHUYÊN CUNG CẤP BỘ CHIA TÍN HIỆU CỦA HÃNG DRAGO, HẢNG PR HÀNG CHẤT LƯỢNG SẢN XUẤT TẠI ĐỨC ĐỘ SAI SỐ: 0,1% HIỆU CHỈNH BẰNG DIP SWITCH HÀNG CÓ SẴN TRONG KHO THÔNG SỐ KỸ THUẬT Technical Data Input Input signal (calibrated switchable) 0 to 20 mA, 4 to 20 mA, 0 to 5 V, 0 to 10 V, 1 to 5 V, 2 to 10 V Input resistance Current input Voltage input ≤ 35 Ohm ≥ 100 kOhm Overload Current input Voltage input < 50 mA < 30 V Transmitter supply Tx (switchable) 16 V (open circuit voltage/short circuit current ≤ 22 V/35 mA) Output I + II Output signal (calibrated switchable) 0 to 20 mA, 4 to 20 mA, 0 to 5 V, 0 to 10 V, 1 to 5 V, 2 to 10 V Load Current output: ≤ 6 V (300 Ohm at 20 mA) Voltage output: ≤ 5 mA (2 kOhm at 10 V) Linear transmission range -1 to +110 % Ripple < 10 mVrms General Data Transmission error < 0.1 % full scale Temperature coefficient 1) < 100 ppm/K Cut-off frequency -3 dB 5 kHz Response time T99 150 µs Test voltage 3 kV AC, 50 Hz, 1 min, Input against Output I against Output II against power supply Working voltage 2) (Basic Insulation) Up to 600 V AC/DC for overvoltage category II and pollution degree 2 acc. to EN 61010-1 between all circuits. Protection against electrical shock Protective separation according to EN 61140 by reinforced insulation in accordance with EN 61010-1 up to 300 V AC/DC for overvoltage category II and pollution degree 2 between all circuits. Ambient temperature Operation Transport and storage –25 °C to +70 °C (-13 to +158 °F) –40 °C to +85 °C (-40 to +185 °F) Power supply 24 V DC 16.8 V to 31.2 V DC, approx. 1.4 W EMC 3) EN 61326-1 Construction 6.2 mm housing, protection class: IP 20, mounting on 35 mm DIN rail acc. to EN 60715 Weight Approx. 70 g Average TC based on the final value in specified operating temperature range As far as relevant the standards and rules mentioned above are considered by development and production of our devices. In addition relevant assembly rules are to be considered by installation of our devices in other equipments. For applications with high working voltages, take measures to prevent accidental contact and make sure that there is sufficient distance or insulation between adjacent situated devices. Minor deviations possible during interference Block diagram

Normsignal-Splitter DN 21000
Isolation Signal Splitter DN 21000

Dimensions Masszeichnung-mitBus Connection Captive plus-minus clamp screws Wire cross-section max. 2.5 mm² / AWG 14 Stripped length 6 to 8 mm / 0.28 in Screw terminal torque 0.8 Nm / 7 lbf in Optional power connection via In-Rail-Bus (see accessories) Terminal assignments 1 Input -I +U +Loop 2 Input +I -U -Loop 3 + Output II 4 - Output II 5 + Output I 6 - Output I 7 + Power supply (connected to In-Rail-Bus) 8 - Power supply (connected to In-Rail-Bus) Liên hệ để được tư vấn: Thanks and best regards Long Tran Mob.: +84 909 006 435 Email.: long.tran@aumyco.com AU MY technology Service Trading Company limited Add.: 93/36 Street 02, Tam Binh Ward, Thu Duc District, Ho Chi Minh city, Vietnam Tel.: +84 3 816 2902 Fax: +84 3 816 2902 Web.: www.aumyco.com Email.: info@aumyco.com www.tbcongnghiep.com www.chuyendoitinhieu.com www.doluongcongnghiep.com
  • CTY CHÚNG TÔI CHUYÊN CUNG CẤP BỘ CHIA TÍN HIỆU CỦA HÃNG DRAGO, HẢNG PR
  • HÀNG CHẤT LƯỢNG SẢN XUẤT TẠI ĐỨC
  • ĐỘ SAI SỐ: 0,1%
  • HIỆU CHỈNH BẰNG DIP SWITCH
  • HÀNG CÓ SẴN TRONG KHO
  • THÔNG SỐ KỸ THUẬT
  • Technical Data
  • Input
  • Input signal
  • (calibrated switchable) 0 to 20 mA, 4 to 20 mA, 0 to 5 V, 0 to 10 V, 1 to 5 V, 2 to 10 V
  • Input resistance Current input
  • Voltage input ≤ 35 Ohm
  • ≥ 100 kOhm
  • Overload Current input
  • Voltage input < 50 mA
  • < 30 V
  • Transmitter supply Tx
  • (switchable) 16 V (open circuit voltage/short circuit current ≤ 22 V/35 mA)
  • Output I + II
  • Output signal
  • (calibrated switchable) 0 to 20 mA, 4 to 20 mA, 0 to 5 V, 0 to 10 V, 1 to 5 V, 2 to 10 V
  • Load Current output: ≤ 6 V (300 Ohm at 20 mA) Voltage output: ≤ 5 mA (2 kOhm at 10 V)
  • Linear transmission range -1 to +110 %
  • Ripple < 10 mVrms
  • General Data
  • Transmission error < 0.1 % full scale
  • Temperature coefficient 1) < 100 ppm/K
  • Cut-off frequency -3 dB 5 kHz
  • Response time T99 150 µs
  • Test voltage 3 kV AC, 50 Hz, 1 min, Input against Output I against Output II against power supply
  • Working voltage 2)
  • (Basic Insulation) Up to 600 V AC/DC for overvoltage category II and pollution degree 2 acc. to EN 61010-1 between all circuits.
  • Protection against electrical shock Protective separation according to EN 61140 by reinforced insulation in accordance with EN 61010-1 up to 300 V AC/DC for overvoltage category II and pollution degree 2 between all circuits.
  • Ambient temperature Operation
  • Transport and storage –25 °C to +70 °C (-13 to +158 °F)
  • –40 °C to +85 °C (-40 to +185 °F)
  • Power supply 24 V DC 16.8 V to 31.2 V DC, approx. 1.4 W
  • EMC 3) EN 61326-1
  • Construction 6.2 mm housing, protection class: IP 20, mounting on 35 mm DIN rail acc. to EN 60715
  • Weight Approx. 70 g
  • Average TC based on the final value in specified operating temperature range
  • As far as relevant the standards and rules mentioned above are considered by development and production of our devices. In addition relevant assembly rules are to be considered by installation of our devices in other equipments. For applications with high working voltages, take measures to prevent accidental contact and make sure that there is sufficient distance or insulation between adjacent situated devices.
  • Minor deviations possible during interference
  • Block diagram
  • Normsignal-Splitter DN 21000
    Isolation Signal Splitter DN 21000

  • Dimensions
  • Masszeichnung-mitBus
  • Connection
  • Captive plus-minus clamp screws
  • Wire cross-section max. 2.5 mm² / AWG 14
  • Stripped length 6 to 8 mm / 0.28 in
  • Screw terminal torque 0.8 Nm / 7 lbf in
  • Optional power connection via In-Rail-Bus (see accessories)
  • Terminal assignments
  • 1 Input -I +U +Loop
  • 2 Input +I -U -Loop
  • 3 + Output II
  • 4 - Output II
  • 5 + Output I
  • 6 - Output I
  • 7 + Power supply (connected to In-Rail-Bus)
  • 8 - Power supply (connected to In-Rail-Bus)
  • Liên hệ để được tư vấn:
  • Thanks and best regards
  • Long Tran
  • Mob.: +84 909 006 435
  • Email.: long.tran@aumyco.com
  • AU MY technology Service Trading Company limited
  • Add.: 93/36 Street 02, Tam Binh Ward, Thu Duc District, Ho Chi Minh city, Vietnam
  • Tel.: +84 3 816 2902 Fax: +84 3 816 2902
  • Web.: www.aumyco.com Email.: info@aumyco.com
  • www.tbcongnghiep.com
  • www.chuyendoitinhieu.com
  • www.doluongcongnghiep.com

BÌNH LUẬN


0 bình luận về "chia tín hiệu giá rẻ|bo chia tin hieu weidmuller|bo chia tin hieu phoenix contact"

GỬI BÌNH LUẬN HOẶC CÂU HỎI CỦA BẠN

Bình luận hay có ý kiến đóng góp. Vui lòng điền vào form bên dưới và gửi cho chúng tôi.

Email:

Nội dung:

Tôi muốn nhận câu trả lời về câu hỏi này qua email


Bộ chia tín hiệu Drago DN21000

Giá bán: liên hệ

Tình trạng:
Hiện có: 0 bình luận

bộ chia tín hiệu drago DN22000

Giá bán: liên hệ

Tình trạng:
Hiện có: 0 bình luận

bộ chia tín hiệu 3109 PR Elelctronics

Giá bán: liên hệ

Tình trạng:
Hiện có: 0 bình luận