THỐNG KÊ

  • Khách đang online: 15
  • Truy cập hôm nay: 358
  • Lượt truy cập: 536768
  • Số trang xem: 598210
  • Tổng số danh mục: 25
  • Tổng số sản phẩm: 109

QUẢNG CÁO

Bạn đang ở: Trang chủ » Danh mục » BỘ CHIA TÍN HIỆU 4-20mA » bộ chia tín hiệu drago DN22000

Dùng cuộn chuột thay đổi chế động phóng to ảnh

Click để xem ảnh lớn !

bộ chia tín hiệu drago DN22000

Mã SP: Drago DN 22000

Giá bán: liên hệ

Tình trạng: Còn hàng

Bảo hành: 24 tháng

Số lượng:

Chia sẻ sản phẩm trên mạng xã hội:


CTY ÂU MỸ LÀ TỔNG ĐẠI LÝ HÃNG DRAGO TẠI VIỆT NAM

BỘ CHIA TÍN HIỆU DRAGO DN 22000 VỚI NGUỒN CẤP 230VAC

TÍNH NĂNG KỸ THUẬT

 

Technical Data

Input

 

Input signal 0...20 mA    4...20 mA    0...5 V    0...10 V
See order information
Input resistance Current input
Voltage input
30 Ohm
500 kOhm
Overload Current input
Voltage input
≤ 200 mA
≤ 30 V

 

Output I, Output II

 

Output signal 0...20 mA    4...20 mA    0...5 V    0...10 V
See order information
Load Current output
Voltage output
≤ 10 V (500 Ohm at 20 mA)
≤ 10 mA (1 kOhm at 10 V)
Offset 20 µA , 10 mV
Ripple < 10 mVrms

 

General Data

 

Transmission error < 0.1 % of final value
Temperature coefficient  1) < 0.015 % of final value /K
Response time < 5 ms
Test voltage 2.5 kV, 50 Hz
Input against Output I against Output II against power supply
Working voltage 2)
(Basic Insulation)
Up to 600 V AC/DC for overvoltage category II and pollution degree 2 acc. to EN 61010-1 between all circuits.
Protection against electrical shock Protective separation to EN 61140 by reinforced insulation in accordance with EN 61010-1 up to 300 V AC/DC for overvoltage category II and pollution degree 2 between all circuits.
Ambient temperature Operation
Transport and storage
   0 to + 55 °C (+32 to +131 °F)
-25 to +80 °C (-13 to +176 °F)
Power supply see order information 80 ... 240 V AC, + 10 %, 48 ... 62 Hz, approx. 3 VA
24 V DC, working range: 20 ... 30 DC, approx. 1.5 W
EMC 3) EN 61326 -1
Construction 12.5 mm housing, protection type: IP 20
Weight Approx. 100 g

 

  1. Average TC in specified operating temperature range
  2. As far as practicable the standards and rules mentioned above are considered by development and production of our devices. In addition the assembly rules for our devices are to be considered by installation in other equipments. For applications with high working voltages, take measures to prevent accidental contact and make sure that there is sufficient distance or insulation between adjacent situated devices.
  3. Minor deviations possible during interference

Block diagram

Dn22000

Dimensions

GehaeuseHighFunctionality

Terminal assignments
Wire cross-section max. 2.5 mm², Multi-wire connection max. 1 mm² (two wires with same cross-section)

 

1 Output I + 5 Output II+
2 Output I - 6 Output II-
3 Input + 7 Power supply +
4 Input - 8 Power supply -

 

Downloads

Product line

 

 

Devices Order No.
Isolation Signal Splitter DN 22 X X X -X
    80 ... 240 V AC         -MP
    24 V DC         -LV
  Input 0 ... 20 mA   0      
  4 ... 20 mA   1      
  0 ... 5 V   2      
  0 ... 10 V   3      
  Output I 0 ... 20 mA     0    
  4 ... 20 mA     1    
  0 ... 5 V     2    
  0 ... 10 V     3    
  Output II 0 ... 20 mA       0  
  4 ... 20 mA       1  
  0 ... 5 V       2  
  0 ... 10 V       3  

 

Liên hệ để được tư vấn:

Long Tran

Mob.: +84 909 006 435

Email.: long.tran@aumyco.com

AU MY technology Service Trading Company limited

Add.: 93/36 Street 02, Tam Binh Ward, Thu Duc District, Ho Chi Minh city, Vietnam

Tel.: +84 3 816 2902      Fax: +84 3 816 2902

Web.:    www.aumyco.com          Email.: info@aumyco.com          

www.tbcongnghiep.com             

www.chuyendoitinhieu.com     

www.doluongcongnghiep.com

BỘ CHIA TÍN HIỆU DÙNG NGUỒN 220VAC
  • CTY ÂU MỸ LÀ TỔNG ĐẠI LÝ HÃNG DRAGO TẠI VIỆT NAM
  • BỘ CHIA TÍN HIỆU DRAGO DN 22000 VỚI NGUỒN CẤP 230VAC
  • TÍNH NĂNG KỸ THUẬT
  • Technical Data
  • Input
  • Input signal 0...20 mA 4...20 mA 0...5 V 0...10 V
  • See order information
  • Input resistance Current input
  • Voltage input 30 Ohm
  • 500 kOhm
  • Overload Current input
  • Voltage input ≤ 200 mA
  • ≤ 30 V
  • Output I, Output II
  • Output signal 0...20 mA 4...20 mA 0...5 V 0...10 V
  • See order information
  • Load Current output
  • Voltage output ≤ 10 V (500 Ohm at 20 mA)
  • ≤ 10 mA (1 kOhm at 10 V)
  • Offset 20 µA , 10 mV
  • Ripple < 10 mVrms
  • General Data
  • Transmission error < 0.1 % of final value
  • Temperature coefficient 1) < 0.015 % of final value /K
  • Response time < 5 ms
  • Test voltage 2.5 kV, 50 Hz
  • Input against Output I against Output II against power supply
  • Working voltage 2)
  • (Basic Insulation) Up to 600 V AC/DC for overvoltage category II and pollution degree 2 acc. to EN 61010-1 between all circuits.
  • Protection against electrical shock Protective separation to EN 61140 by reinforced insulation in accordance with EN 61010-1 up to 300 V AC/DC for overvoltage category II and pollution degree 2 between all circuits.
  • Ambient temperature Operation
  • Transport and storage 0 to + 55 °C (+32 to +131 °F)
  • -25 to +80 °C (-13 to +176 °F)
  • Power supply see order information 80 ... 240 V AC, + 10 %, 48 ... 62 Hz, approx. 3 VA
  • 24 V DC, working range: 20 ... 30 DC, approx. 1.5 W
  • EMC 3) EN 61326 -1
  • Construction 12.5 mm housing, protection type: IP 20
  • Weight Approx. 100 g
  • Average TC in specified operating temperature range
  • As far as practicable the standards and rules mentioned above are considered by development and production of our devices. In addition the assembly rules for our devices are to be considered by installation in other equipments. For applications with high working voltages, take measures to prevent accidental contact and make sure that there is sufficient distance or insulation between adjacent situated devices.
  • Minor deviations possible during interference
  • Block diagram
  • Dn22000
  • Dimensions
  • GehaeuseHighFunctionality
  • Terminal assignments
  • Wire cross-section max. 2.5 mm², Multi-wire connection max. 1 mm² (two wires with same cross-section)
  • 1 Output I + 5 Output II+
  • 2 Output I - 6 Output II-
  • 3 Input + 7 Power supply +
  • 4 Input - 8 Power supply -
  • Downloads
  • Download Data sheet
  • Download User Instructions
  • Download Tender specification
  • Download EPlan-Macros
  • Product line
  • Devices Order No.
  • Isolation Signal Splitter DN 22 X X X -X
  • 80 ... 240 V AC -MP
  • 24 V DC -LV
  • Input 0 ... 20 mA 0
  • 4 ... 20 mA 1
  • 0 ... 5 V 2
  • 0 ... 10 V 3
  • Output I 0 ... 20 mA 0
  • 4 ... 20 mA 1
  • 0 ... 5 V 2
  • 0 ... 10 V 3
  • Output II 0 ... 20 mA 0
  • 4 ... 20 mA 1
  • 0 ... 5 V 2
  • 0 ... 10 V 3
  • Goto service web portal
  • Subject to change!

BÌNH LUẬN


0 bình luận về "bộ chia tín hiệu drago DN22000"

GỬI BÌNH LUẬN HOẶC CÂU HỎI CỦA BẠN

Bình luận hay có ý kiến đóng góp. Vui lòng điền vào form bên dưới và gửi cho chúng tôi.

Email:

Nội dung:

Tôi muốn nhận câu trả lời về câu hỏi này qua email


Bộ chia tín hiệu 4-20mA DN21000

Giá bán: liên hệ

Tình trạng:
Hiện có: 0 bình luận

Bộ chia tín hiệu Drago DN21000

Giá bán: liên hệ

Tình trạng:
Hiện có: 0 bình luận