THỐNG KÊ

  • Khách đang online: 16
  • Truy cập hôm nay: 359
  • Lượt truy cập: 536769
  • Số trang xem: 598211
  • Tổng số danh mục: 25
  • Tổng số sản phẩm: 109

QUẢNG CÁO

Bạn đang ở: Trang chủ » Danh mục » BỘ CHIA TÍN HIỆU 4-20mA » Bộ chia tín hiệu Drago DN21000

Dùng cuộn chuột thay đổi chế động phóng to ảnh

Click để xem ảnh lớn !

Bộ chia tín hiệu Drago DN21000

Mã SP: Drago DN21000

Giá bán: liên hệ

Tình trạng: Còn hàng

Bảo hành: 24 tháng

Số lượng:

Chia sẻ sản phẩm trên mạng xã hội:


CTY ÂU MỸ LÀ ĐẠI LÝ ĐỘC QUYỀN HÃNG DRAGO TẠI VIỆT NAM

BỘ CHIA TÍN HIỆU DRAGO DN21000

THÔNG SỐ KỸ THUẬT:

Technical Data

Input

Input signal 0 to 20 mA, 4 to 20 mA, 0 to 5 V, 0 to 10 V, 1 to 5 V, 2 to 10 V
calibrated switchable
Input resistance Current input
Voltage input
≤ 35 Ohm
≥ 100 kOhm
Overload Current input
Voltage input
≤ 50 mA
≤ 30 V
Transmitter supply voltage 16 V (open circuit voltage < 22 V)
Max. supply current < 35 mA

Output I + II

Output signal 0 to 20 mA, 4 to 20 mA, 0 to 5 V, 0 to 10 V, 1 to 5 V, 2 to 10 V
calibrated switchable
Load Current output: ≤ 6 V (300 Ohm at 20 mA) Voltage output: ≤ 5 mA (2 kOhm at 10 V)
Offset Current output: < 20 µA Voltage output: < 10 mV
Linear transmission range -1 to +110 %
Ripple < 10 mVeff

General Data

Transmission error < 0.1 % full scale
Temperature coefficient1) < 100 ppm/K
Cut-off frequency 5 kHz
Response time (T10-90) 100 µs
Test voltage 3 kV, 50 Hz, 1 min, Input against Output I against Output II against power supply
Working voltage 2)
(Basic Insulation)
Up to 600 V AC/DC for overvoltage category II and pollution degree 2 acc. to EN 61010-1 between all circuits.
Protection against electrical shock Protective separation according to EN 61140 by reinforced insulation in accordance with EN 61010-1 up to 300 V AC/DC for overvoltage category II and pollution degree 2 between all circuits.
Ambient temperature Operation
Transport and storage
–25 °C to +70 °C   (-13 to +158 °F)
–40 °C to +85 °C   (-40 to +185 °F)
Power supply 24 V DC       16.8 V to 31.2 V DC, approx. 1.3 W
EMC 3) EN 61326-1
Construction 6.2 mm housing, protection class: IP 20
Weight Approx. 70 g
  1. Average TC based on the final value in specified operating temperature range
  2. As far as relevant the standards and rules mentioned above are considered by development and production of our devices. In addition relevant assembly rules are to be considered by installation of our devices in other equipments. For applications with high working voltages, take measures to prevent accidental contact and make sure that there is sufficient distance or insulation between adjacent situated devices.
  3. Minor deviations possible during interference

Block diagram

Dimensions

Masszeichnung-mitBus

Terminal assignments

1 + Input    -I   +U   +Loop
2 - Input    +I   -U   -Loop
     
3 + Output II
4 - Output II
     
5 + Output I
6 - Output I
     
7 + Power supply (connected to In-Rail-Bus)
8 - Power supply (connected to In-Rail-Bus)

 

 

 

Connection
Captive plus-minus clamp screws
Wire cross-section max. 2.5 mm² / AWG 14
Stripped length 6 to 8 mm / 0.28 in
Screw terminal torque 0.8 Nm / 7 lbf in
Optional power connection via In-Rail-Bus (see accessories)

Liên hệ để được tư vấn:

Long Tran

Mob.: +84 909 006 435

Email.: long.tran@aumyco.com

AU MY technology Service Trading Company limited

Add.: 93/36 Street 02, Tam Binh Ward, Thu Duc District, Ho Chi Minh city, Vietnam

Tel.: +84 3 816 2902      Fax: +84 3 816 2902

Web.:    www.aumyco.com          Email.: info@aumyco.com          

www.tbcongnghiep.com             

www.chuyendoitinhieu.com     

 

www.doluongcongnghiep.com

CHIA TÍN HIỆU
  • CTY ÂU MỸ LÀ ĐẠI LÝ ĐỘC QUYỀN HÃNG DRAGO TẠI VIỆT NAM
  • BỘ CHIA TÍN HIỆU DRAGO DN21000
  • THÔNG SỐ KỸ THUẬT:
  • Technical Data
  • Input
  • Input signal 0 to 20 mA, 4 to 20 mA, 0 to 5 V, 0 to 10 V, 1 to 5 V, 2 to 10 V
  • calibrated switchable
  • Input resistance Current input
  • Voltage input ≤ 35 Ohm
  • ≥ 100 kOhm
  • Overload Current input
  • Voltage input ≤ 50 mA
  • ≤ 30 V
  • Transmitter supply voltage 16 V (open circuit voltage < 22 V)
  • Max. supply current < 35 mA
  • Output I + II
  • Output signal 0 to 20 mA, 4 to 20 mA, 0 to 5 V, 0 to 10 V, 1 to 5 V, 2 to 10 V
  • calibrated switchable
  • Load Current output: ≤ 6 V (300 Ohm at 20 mA) Voltage output: ≤ 5 mA (2 kOhm at 10 V)
  • Offset Current output: < 20 µA Voltage output: < 10 mV
  • Linear transmission range -1 to +110 %
  • Ripple < 10 mVeff
  • General Data
  • Transmission error < 0.1 % full scale
  • Temperature coefficient1) < 100 ppm/K
  • Cut-off frequency 5 kHz
  • Response time (T10-90) 100 µs
  • Test voltage 3 kV, 50 Hz, 1 min, Input against Output I against Output II against power supply
  • Working voltage 2)
  • (Basic Insulation) Up to 600 V AC/DC for overvoltage category II and pollution degree 2 acc. to EN 61010-1 between all circuits.
  • Protection against electrical shock Protective separation according to EN 61140 by reinforced insulation in accordance with EN 61010-1 up to 300 V AC/DC for overvoltage category II and pollution degree 2 between all circuits.
  • Ambient temperature Operation
  • Transport and storage –25 °C to +70 °C (-13 to +158 °F)
  • –40 °C to +85 °C (-40 to +185 °F)
  • Power supply 24 V DC 16.8 V to 31.2 V DC, approx. 1.3 W
  • EMC 3) EN 61326-1
  • Construction 6.2 mm housing, protection class: IP 20
  • Weight Approx. 70 g
  • Average TC based on the final value in specified operating temperature range
  • As far as relevant the standards and rules mentioned above are considered by development and production of our devices. In addition relevant assembly rules are to be considered by installation of our devices in other equipments. For applications with high working voltages, take measures to prevent accidental contact and make sure that there is sufficient distance or insulation between adjacent situated devices.
  • Minor deviations possible during interference
  • Block diagram
  • Dn21000
  • Dimensions
  • Masszeichnung-mitBus
  • Terminal assignments
  • 1 + Input -I +U +Loop
  • 2 - Input +I -U -Loop
  • 3 + Output II
  • 4 - Output II
  • 5 + Output I
  • 6 - Output I
  • 7 + Power supply (connected to In-Rail-Bus)
  • 8 - Power supply (connected to In-Rail-Bus)
  • Connection
  • Captive plus-minus clamp screws
  • Wire cross-section max. 2.5 mm² / AWG 14
  • Stripped length 6 to 8 mm / 0.28 in
  • Screw terminal torque 0.8 Nm / 7 lbf in
  • Optional power connection via In-Rail-Bus (see accessories)

BÌNH LUẬN


0 bình luận về "Bộ chia tín hiệu Drago DN21000"

GỬI BÌNH LUẬN HOẶC CÂU HỎI CỦA BẠN

Bình luận hay có ý kiến đóng góp. Vui lòng điền vào form bên dưới và gửi cho chúng tôi.

Email:

Nội dung:

Tôi muốn nhận câu trả lời về câu hỏi này qua email


SẢN PHẨM LIÊN QUAN

Bộ chia tín hiệu 4-20mA DN21000

Giá bán: liên hệ

Tình trạng:
Hiện có: 0 bình luận